Muratec F-114 Series manual Advanced Fax Setting Options

	Advanced Fax Setting Options
Option		Description
Send Forward		You can set the machine to always forward all of the
		outgoing faxes to a specified destination, in addition to the
		fax numbers you entered.
		Select Off to turn this feature off.
		Select On to turn this feature on. You can set the number
		of the remote fax machine to which faxes are forwarded.
RCV Forward		You can set your machine to forward incoming faxes to
		another fax number during a specified period of time.
		When a fax arrives at your machine, it is stored in the
		memory. Then, the machine dials the fax number that you
		have specified and sends the fax.
		Select Off to turn this feature off.
		Select On to turn this feature on. You can set the fax
		number to which faxes are forwarded. Then, you can enter
		the starting time and/or the ending time. The Local Copy
		option allows you to set the machine to print the fax, if fax
		forwarding is completed without any error.
Toll Save		You can set your machine to store your faxes into the
		memory and send them at the specified toll-saving time.
		For details about Toll Save mode, see page 1.39.
		Select Off to turn this feature off.
		Select On to turn this feature on. You can set the starting
		time and/or the ending time for Toll Save mode.
Junk Fax Setup		Using the Junk Fax Barrier feature, the system will not
		accept faxes sent from remote stations of which there
		machine ID’s are stored in the memory as junk fax
		numbers. This feature is useful for blocking any unwanted
		faxes.
		Select Off to turn the feature off. Anybody can send you a fax.
		Select On to turn the feature on. You can set up to 10 fax
		numbers as junk fax numbers using the Set option. This
		feature recognize the last 6 digits of the fax number set
		as a remote fax machine’s ID.
		After storing numbers, you do not receive any faxes from
		the registered stations. To delete all the junk fax numbers,
		use the All Delete option.

6.34FAXING