Muratec F-114 Series manual Receiving Faxes in the Memory

To set up the DRPD mode:

1Press Menu until “Fax Setup” appears on the top line of the display.

The first available menu item, “Receive Mode,” displays on the bottom line.

2Press the scroll button (W or X) until you see “DRPD Mode” on the bottom line and press Enter.

3When “Set” displays on the bottom line, press Enter.

The LCD displays ‘[Waiting Ring].”

4Call your fax number from another telephone. It is not necessary to place the call from a fax machine.

5When your machine begins to ring, do not answer the call. The machine requires several rings to learn the pattern.

When the machine completes learning, the LCD displays “End DRPD [Setup]”.

If the DRPD setup fails, “DRPD Ring Error” appears. Press Enter when “DRPD Mode” displays and retry from Step 3.

6To return to Standby Mode, press Stop/Clear.

When the DRPD feature is set up, the DRPD option is available in the Receive Mode menu. To receive faxes in the DRPD mode, you need to set the menu to DRPD.

NOTES:

•DRPD must be set up again if you re-assign your fax number, or connect the machine to another telephone line.

•After DRPD has been set up, call your fax number again to verify that the machine answers with a fax tone. Then have a call placed to a different number assigned to that same line to be sure the call is forwarded to the extension telephone or answering machine plugged into the EXT. jack.:

Receiving Faxes in the Memory

Since your machine is a multi-tasking device, it can receive faxes while you are making copies or printing. If you receive a fax while you are copying or printing, your machine stores incoming faxes in the memory. Then, as soon as you finish copying or printing, the machine automatically prints the fax.

6.14FAXING