Muratec F-114 Series manual Toll Save Mode

Toll Save Mode

Using the Toll Save button on the control panel, you can quickly 1 set your machine to send the document(s) stored in the memory

during the preset time slot, when the call charge is lowered. This Toll Save mode helps you to take advantage of lower long distance rates at night, for example.

NOTE: The toll-saving time slot may vary depending on your contract with a long distance phone company.

To turn the toll save mode on:

1Press Toll Save. The button backlight turns on.

2Press Enter when “Start Time” displays on the bottom line.

3Enter the time when your machine starts sending toll save faxes, using the number keypad.

To select “AM” or “PM” for 12-hour format, press the or

button or any number button.

4Press Enter when the starting time on the display is correct.

5Press the scroll button (W or X) to display “End Time” and press Enter.

6Enter the time when the toll save transmission ends, using the number keypad.

7Press Enter to save the setting.

8To return to Standby Mode, press Stop/Clear.

Once Toll Save mode is activated, your machine stores all of the documents to be faxed into the memory and sends them at the programed time.

To turn Toll Save mode off, press Toll Save again. The button backlight turns off and the mode is deactivated.

NOTE: Once the toll-saving time is set, the Toll Save button allows you to only enable or disable Toll Save mode. To change the time setting, use the Toll Save item in the Advanced Fax menu. See page 6.34.

GETTING STARTED 1.39