Muratec F-114 Series manual Loading Paper for Copying, Preparing a Document

Loading Paper for Copying

The instructions for loading print materials are the same whether you are printing, faxing or copying. For coping, you can use Letter-, A4-, Legal-sized print materials. For further details, see page 1.12 for loading in the paper tray and page 2.8 for loading in the manual feeder.

Preparing a Document

Using the ADF (Automatic Document Feeder), you can load up to 30 documents (47~90g/m2, 12.5~24lb) for one job.

When you use the ADF:

•Do not load documents smaller than 142 x 148 mm or larger than 216 x 356 mm.

•Do not attempt to feed the following types of documents:

-carbon-paper or carbon-backed paper

-coated paper

-onion skin or thin paper

-wrinkled or creased paper

-curled or rolled paper

-torn paper

•Remove all staples and paper clips before loading documents.

•Make sure any glue, ink or correction fluid on the paper is completely dry before loading documents.

•Do not load documents containing different sizes or weights of paper.

•Do not load booklet, pamphlet, transparencies or documents having other unusual characteristics.

4.2COPYING