Muratec F-114 Series manual Faxing

7To enter more fax numbers, press 1 to select “Yes” and repeat steps 4 and 5. You can add up to 10 destinations.

Note that you cannot use group dial numbers for another fax number.

8When you finish entering fax numbers, press 2 to select “No” at a Another No. prompt.

The display asks you to enter a name.

9To assign a name to the transmission, enter the name. If not, skip this step.

For details on how to enter the name using the number keypad, see page 1.32.

10Press Enter.

The display shows the current time and asks you to enter the starting time when the fax is to be sent.

11Enter the time using the number keypad.

To select “AM” or “PM” for 12-hour format, press the or

button or any number button.

If you set a time earlier than the current time, the document will be sent at that time on the following day.

12Press Enter when the starting time displays correctly.

The document is scanned into the memory before transmission. The display shows the memory capacity and the number of pages being stored in the memory.

The machine returns to Standby mode. The display reminds you that you are in Standby mode and that a delayed fax is set.

NOTE: If you want to cancel the delayed transmission, see “Canceling a Scheduled Fax” on page 6.28.

6.24FAXING