Muratec F-114 Series manual Setting the Time Out Option, Collation Copying

Setting the Time Out Option

You can set the time the machine waits before it restores the default copy settings, if you do not start copying after changing them on the control panel.

1Press Menu on the control panel until “Copy Setup” appears on the top line of the display.

2Press the scroll button (W or X) to display “Timeout” on the bottom line.

3Press Enter to access the menu item.

4Press the scroll button (W or X) until the status you want appears on the display.

You can select from 15, 30, 60 and 180 (seconds). Selecting “Off” means that the machine does not restore the default settings until you press Start Copy/Fax to start copying, or Stop/Clear to cancel.

5Press Enter to save the selection.

6To return to Standby mode, press Stop/Clear.

Collation Copying

The Collation copying feature is available only when you load documents in the ADF.

1Press Menu on the control panel until “Copy Setup” appears on the top line of the display.

2Press the scroll button (W or X) to display “Copy Collated” on the bottom line.

3Press Enter to access the menu item.

4If you are making multiple copies and want to collate them, press the scroll button (W or X) to set “Copy Collated” to “On” and press Enter.

1

2

3

1

2

3

1

1

2

2

3

3

S Copy Collated On S Copy Collated Off

5Press Start Copy/Fax to begin copying.

4.8COPYING