Muratec F-114 Series Document does not, Feed into the machine, Right size, not too thick or thin

Condition	Suggested solutions
The document does not	• Make sure that the document is not wrinkled and you are
feed into the machine.	putting it in correctly. Check that the document is the
	right size, not too thick or thin.
	• Make sure that the control panel is firmly closed.
Faxes are not received	• Fax mode should be selected.
automatically.	• Make sure that there is paper in the tray.
	• Check to see if the display shows “Memory Full.”
The machine does not	• Make sure that the document is loaded in the ADF.
send.	• “TX” should show up on the display.
	• Check the other fax machine you are sending to, to see if
	it can receive your fax.
The incoming fax has	• The fax machine sending you the fax may be faulty.
blank spaces or is	• A noisy phone line can cause line errors.
received with a poor-	• Check your machine by making a copy.
quality.	• The toner cartridge may be empty. Replace the toner
	cartridge, referring to page 8.9.
Some of the words on a	The fax machine sending you the fax had a temporary
incoming fax are	document jam.
stretched.
There are lines on the	Check your scan unit for marks and clean it. See
documents you send.	page 8.5.
The machine dials a	The other fax machine may be turned off, out of paper,
number, but a connection	or cannot answer incoming calls. Speak with the other
with another fax machine	machine operator and ask her/him to clear out the
fails.	problem.
Documents are not	There may not be enough memory to store the
stored in the memory.	document. If the display shows a “Memory Full”
	message, delete any documents you no longer need
	from the memory and then restore the document.
Blank areas appear at	You may have chosen the wrong paper settings in the
the bottom of each page	user option setting. See page 1.36.
or on other pages, with a
small strip of text at the
top.

9.22TROUBLESHOOTING