Muratec F-114 Series manual Storing a Number for One-touch Dialing, Clear

Automatic Dialing

One-touch Dialing

The 20 one-touch buttons on the control panel lets you store frequently-used fax numbers and dial a number automatically with a touch of a button.

Storing a Number for One-touch Dialing

1 Press and hold one of the one-touch dial buttons for about

2 seconds.
The display asks you to enter the fax number. “T” signifies
that you are assigning a one-touch dial button.
If a number is already stored in the location you chose, the
display shows the number to allow you to change it. To
start over with another one-touch button, press Stop/
Clear.	6
2 Enter the number you want to store using the number

keypad and press Enter.

To insert a pause between numbers, press Redial/Pause.

A symbol “-” appears on the display.

If you make a mistake while entering a number, press the

Wbutton and re-enter the correct number.

3To assign a name to the number, enter the name you want. For details about entering characters, see page 1.32.

If you do not want to assign a name, skip this step.

4Press Enter when the name appears correctly or without entering a name.

5To store more numbers, press a one-touch button and repeat steps 2 through 4.

OR

To return to Standby mode, press Stop/Clear.

FAXING 6.15