Muratec F-114 Series manual Maintenance

Press Enter to save the selection.

4

3

5

Press the Scroll button (W or X) to select “On” or “Off.” Select “On” to ignore the Toner Empty message.

Select “Off” to stop printing when the message appears. This is the default setting.

Ignoring the Toner Empty Message

When the toner cartridge is empty, the machine shows a “Toner Empty” message and stops printing.

You can set the machine to ignore the message when it displays and to continue printing the pages.

1 Press Menu until “Machine Setup” appears on the display.

2 Press the scroll button (W or X) until “Ignore Toner” appears on the bottom line and press Enter.

If the problem remains, repeat steps 1 through 4.

Cleaning the Drum

If there are streaks or spots on your print, the OPC drum of the cartridge may require cleaning.

1 Before setting the cleaning procedure, make sure that paper is loaded in the machine.

2 Press Menu on the control panel until “Maintenance” appears on the top line of the display.

The first available menu item, “Clean Drum,” displays on the bottom line.

3 Press Enter.

4 When the display asks you to confirm your selection, press Enter.

The machine prints a cleaning page. Toner particles on the drum surface are affixed to the paper.

8

MAINTENANCE 8.11