Muratec F-114 Series manual Adjusting Shading, Cleaning Your Machine, Cleaning the Outside

Adjusting Shading

When the scan unit becomes dirty, it can alter the shading value. If your copy has black lines or is blurred, adjust the shading setting.

1Load a sheet of white paper into the ADF.

2Press Menu on the control panel until “Maintenance” appears on the top line of the display.

3Press the scroll button (W or X) until “Adjust Shading ” appears on the bottom line and press Enter.

4Press the scroll button (W or X) to select “On” and press Enter.

Your machine picks up the paper and adjusts the shading value.

Cleaning Your Machine

To maintain the print quality, follow the cleaning procedures below each time the toner cartridge is replaced or if print quality problems occur.

NOTES:

•While cleaning the inside of the machine, be careful not to touch the transfer roller, located underneath the toner cartridge. Oil from your fingers can cause print quality problems.

• Cleaning the cabinet of your machine with products containing	8
large amounts of alcohol, solvent or other strong substances can
discolor or crack the cabinet.

Cleaning the Outside

Clean the cabinet of the machine with a soft lint-free cloth. You can dampen the cloth slightly with water, but be careful not to let any water drip onto or inside the machine.

MAINTENANCE 8.3