Muratec F-114 Series Selecting Print Materials, Type, Input Sources and Capacities, Plain paper

Selecting Print Materials

You can print on a variety of print materials, such as plain paper, envelopes, labels, transparencies and so on. Always use print materials that meet the guidelines for use with this machine. See “Paper Specifications” on page A.6. To get the best possible print quality, use only high-quality copier-grade paper.

When you choose print materials, consider the following:

•Desired outcome: The paper you choose should be appropriate for your project.

•Size: You can use any size paper that fits easily within the paper adjusters of the paper tray.

•Weight: Your machine supports paper weights as follows:

-16 ~ 24 lbs (60 ~ 90 g/m2) bond for the paper tray

-16 ~ 43 lbs (60 ~ 163 g/m2) bond for the manual feeder

•Brightness: Some papers are whiter than others and produce sharper, more vibrant images.

•Surface smoothness: The smoothness of the paper affects how crisp the printing looks on the paper.

CAUTION: Using print materials that dose not conform to the specifications listed on page A.6 may cause problems that may require service. This service is not covered by the warranty or service agreements.

Type, Input Sources and Capacities

Paper Type	Input Source/Capacity*
	Paper Tray	Manual Feeder
Plain paper	250	1
Envelopes	-	1
Labels**	-	1
Transparency films**	-	1
Card stocks**	-	1

*Maximum capacity may be reduced depending on the paper thickness.

**If you experience excessive jamming, load one sheet at a time through the manual feeder.

2.2PAPER HANDLING