English
Pre-Installation Instructions
This refrigerator is for
Note: Allow the unit to sit on its base for at least one hour before installation.
Preparation Before Installing
First, clean product's surface with soft cloth, remove all protective packaging covering the product.
1.Pull the upper drawer open. Refer to the illustrations below. Remove crisper and set aside. Then place drawer dividers to one side as illustrated.
2.With two hands, lift up on the metal drawer divider rod to remove from the slots in the front and rear of the drawer. Once the drawer divider rod is free from the slots(as illustrated), turn and lift as not to hit the control panel.
3.Take the drawer divider assembly out of the upper compartment and place safely aside.
Note: After completing these three steps please close the upper drawer to avoid damage to your person and product during installation.
4