Muratec F-114 Series manual Using the Save Modes, Speaker Volume, Toner Save Mode

Speaker Volume

To adjust the volume using the On Hook Dial button:

1Press On Hook Dial. A dial tone sounds from the speaker.

2Press the scroll button (W or X) until you hear the loudness you want. The display shows the current volume level.

3Press Stop/Clear to save the change and return to Standby mode.

To adjust the volume using the handset.(for USA only)

1Pick up the handset. A dial tone sounds from the earpice.

2Press the scroll button (W or X) until you find the loudness you want. You can select either “High” or “Low”.

3Press Enter to save selection and replace the handset.

NOTE: You can adjust the speaker volume only when the telephone line is connected.

Using the Save Modes

Toner Save Mode

Toner Save mode allows your machine to use less toner on each page. Activating this mode extends the life of the toner cartridge longer than normal, but it reduces the print quality.

To turn the toner save mode on or off, press Toner Save.

•If the button backlight is on, the mode is active and the machine uses less toner when printing a document.

•If the button backlight is off, the mode is deactivated and the machine prints with the normal quality.

NOTE: For PC-printing, you can also turn toner save mode on or off, in the printer properties. See page 3.9.

1.38GETTING STARTED