Muratec F-114 Series manual Faxing Problems

Condition	Suggested solutions
The unit scans very slowly.	• Check if the machine is printing received data. Scan
	the document after the current job is completed.
	• Graphics are scanned more slowly than text.
	• Communication speed becomes slow in scan mode
	because of the large amount of memory required to
	analyze and reproduce the scanned image. Set your
	computer to the ECP printer mode through BIOS
	setting. It will help to increase the speed. For details
	about how to set BIOS, refer to your computer user’s
	guide.
Message appears on your	• There may be a copying or printing job in progress.
computer screen:	When the current job is complete, try the job again.
• “Device can't be set to the	• The selected port is currently being used. Restart your
H/W mode you want.”	computer and try again.
• “Port is being used by	• The printer cable may be improperly connected or the
another program.”	power may be off. You must use a USB 1.1 compliant
• “Port is Disabled.”	cable.
• “Scanner is busy receiving	• The scanner driver is not installed or an operating
or printing data. When the	environment is not set up properly.
current job is completed,	• Ensure that port is properly connected and power is
try again.”	on, and then restart your computer.
• “Invalid handle.”
• “Scanning has failed.”

Faxing Problems

Condition	Suggested solutions
The machine is not	• Unplug the power cord and plug it in again.
working, there is no	• Ensure that there is power to the electrical receptacle.
display and the buttons
are not working.
No dial tone sounds.	• Check that the phone line is connected properly.
	• Check that the phone socket in the wall is working by
	plugging in another phone.
		9
The numbers stored in	Make sure that the numbers are stored in the memory
the memory do not dial	correctly. Print a Phonebook list, referring to page
correctly.	page 6.21.

TROUBLESHOOTING 9.21