HP 1GSa/s Digitizing Oscilloscope 16532A manual Product Description, Accessories Supplied

HP 16532A - General Information

1-4. Product Description

The HP 16532A Oscilloscope Module is a 1 GSa/s digitizing oscilloscope. Some of the main features are:

∙1 GSa/s digitizing for 250 MHz bandwidth sin- gle shot analysis.

∙8000 samples per channel.

∙Automatic pulse parameters, displays time be- tween markers, acquires until specified time between markers is captured, performs statis- tical analysis on time between markers.

∙Lightweight miniprobes.

1-5. Accessories Supplied

The following accessories are supplied with the HP 16532A Oscilloscope module. Quantity one unless shown otherwise.

∙User’s Reference and Programming Refer- ence set

∙Service Guide

∙HP 10441A 10:1 probes, Qty 2

∙Right angle BNC adapters, Qty 2

∙BNC miniprobe adapter

∙Master-slave trigger cable

∙Operating System Software

1-6. Accessories Available

∙10:1, 100:1, 50 Ω, 10 pf resistive divider probe set, 1.2 m (HP 10020A)

∙BNC-to-BNC cable, 1.2 m (HP 10503A)

∙24-pin IC test clip (HP 10211A)

∙BNC-to-BNC ac coupling capacitor (HP 10240B)

10:1 Probe:

∙1-MΩ, 7.5-pf miniprobe, 1 m (HP 10435A) 1:1 Probes:

∙40-pf miniprobe, 1 m (HP 10438A)

∙64-pf miniprobe, 2 m (HP 10439A)

∙50-Ωminiprobe, 2 m (HP 10437A)

100:1 Probe:

∙10-MΩ, 2.5-pf miniprobe, 2 m (HP 10440A)

1-7. Specifications

Module specifications are listed in table 1-1. These specifications are the performance standards against which the module is tested.

1-8. Operating Characteristics

Table 1-2 is a listing of the module operating characteristics. The operating characteristics are not specifications, but are the typical operating characteristics included as additional information for the user.

1-9. Recommended Test

Equipment

Equipment required to test and maintain the

HP 16532A Oscilloscope Module is listed in table 1-3. Other equipment may be substituted if it meets or exceeds the critical specifications listed in the table.

1-2