3.Install wheel axle (2) through wheel carriage (7) and install wheels (3) onto wheel axle (2) with spacers (26) as shown. Insert pole assembly into tank assembly as shown. Secure bottom pole (4) to tank and wheel bracket as shown, a deep socket is recommended. IMPORTANT! DO NOT OVER
TIGHTEN.
26 | 3 |
|
2 |
7 |
26 |
3 |
4 |
IMPORTANT!:
THE SPACER (26) WILL FIT LOOSELY UNTIL SECURED INTO THE CAVITY OF THE BASE.
WARNING!
TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
5 |
6 |
8 |
4.Secure tank struts (11) to pole. Rotate
10
10
WARNING!
9
11
1
TIGHTEN BOLT (9) IN LOCK NUT (12) UNTIL FLUSH (EVEN) WITH LOCK NUT’S OUTER EDGE.
11
9 | 10/05 | ID# 21198805 |