1. Mark pole sections with tape as shown.
MIDDLE
2
1
5"
(13 cm)
TOP
TAPE
(not supplied)
5"
(13 cm)
3
BOTTOM
TAPE
(not supplied)
2. IMPORTANT! Bounce pole top (1) and middle section (2) together as shown until they no longer move toward taped reference mark. Upright assembly.
2
NOTE: |
POLE SECTIONS |
SHOULD HAVE A |
MINIMUM OVERLAP. |
1
IMPORTANT! Holes in top (1) and bottom
3. pole (3) sections MUST align to correctly position elevator system toward playing surface. Add bottom pole section (3) to assembly as shown and bounce until completely tight.
1
2
NOTE:
POLE SECTIONS SHOULD HAVE A
MINIMUM OVERLAP.
3
Wood Scrap
P/N 214573 | 03/04 | 8 |