Huffy 4.24C manual Section B Securing the System

Page 15

SECTION B: SECURING THE SYSTEM

1.Place assembled unit to desired location. Fill tank with water (30 gallons/114 liters) or sand (360 lb./163 kg) and snap tank cap (23) in place.

Insert T-strap (27) through slot on back of base as shown. Secure unit to ground by twisting tie down stake (25) into ground and hooking T-strap (27) onto tie down stake (25).

27

28

CAUTION!

ADD TWO GALLONS (7.6 LITERS) OF NON-TOXIC ANTIFREEZE IN SUB-FREEZING CLIMATES.

WARNING!

TWO PEOPLE

REQUIRED FOR THIS

PROCEDURE. FAILURE

TO FOLLOW THIS

WARNING COULD

RESULT IN SERIOUS

INJURY AND/OR

PROPERTY DAMAGE.

27

25

27

15

03/03

P/N 211988B

 

Image 15
Contents Pool System Safety Instructions Warranty Card Front 211239 1/98 Hardware Identifier Bolts & Nuts AND/OR Section a Assemble the Base211988B 03/03 03/03 211988B Do not Leave Section B Assemble the Backboard Do not use Washers here on Spring return Style rims Clip ARM Clip Body NET Installation Section B Securing the System Section C Apply Height and Moving Label Moving System