STEP 2 (See Diagram 2)
A.) Attach the two Pivot Brackets (#12) to the Backrest Frame (#7) from each side.
B.) Secure each Pivot Bracket to the Backrest Frame with two M8 x ¾” Allen Bolts (#38) and two Ø ¾” Washers (#45).
C.) Lift the Backrest Frame and insert the two Pivot Brackets into the open slot on Rear Support Frame (#2). Make sure the groves on the Pivot are attached on the slots completely and the Pivots can swing smoothly.
D.) Cover the two open slots on the Rear Support Frame with Left & Right Swivel Cover (#30 & #31) to prevent finger trapped in the openings.
DIAGRAM 2
7