JVC LVT1007-010A[A] manual Turning Analog Direct On and Off, Press TV SOUND/DBS, Press TAPE/CDR

Page 21

Turning Analog Direct On and Off

You can enjoy the sound closer to the original source by overriding the sound adjustments such as speaker output level adjustments (see page 30), Digital Equalization (see page 30), Surround and DSP modes (see pages 32 to 37), Bass Boost (see page 20) and Midnight Mode (see page 18). You can only adjust the volume level while Analog Direct is in use.

•Once you have made adjustment, it is memorized for each analog source.

RX-7032V AUDIO/VIDEO CONTROL RECEIVER

Changing the Source Name

Remote

NOT

When you have connected an CD recorder to the TAPE/CDR IN jacks or a DBS tuner to the TV SOUND/DBS IN jacks on the rear panel, change the source name which will be shown on the display.

RX-7032V AUDIO/VIDEO CONTROL RECEIVER

ANALOG DIRECT

Press ANALOG DIRECT so that “A DIRECT” appears on the display.

ANALOG

L C

R LINEAR PCM

SUBWFR

SPEAKERS 1

LS

RS

VOLUME

The lamp on the button also lights up.

•Each time you press the button, Analog Direct turns on and off.

Notes:

•When digital input mode is in use, Analog Direct is not available.

•Turning on Surround or DSP mode cancels Analog Direct and previously selected sound adjustments are recalled.

•If Analog Direct is in use, Midnight Mode is temporarily canceled.

•Turning on Analog Direct cancels Input Attenuator (see page 18).

When changing the source name from “TV” to “DBS”:

1.Press TV SOUND/DBS.

• Make sure “TV” appears on the display.

2.Press and hold TV SOUND/DBS until “ASSGN DBS” appears on the display.

 

ANALOG

 

L

R

LINEAR PCM

SUBWFR

SPEAKERS 1

VOLUME

Note:

When connecting a DBS tuner to the TV SOUND/DBS IN jacks, change the source name to “DBS,” which will be shown on the display when selected as the source. Otherwise you cannot view any picture from the DBS tuner.

When changing the source name from “TAPE” to “CDR”:

1.Press TAPE/CDR.

• Make sure “TAPE” appears on the display.

2.Press and hold TAPE/CDR until “ASSGN CDR” appears on the display.

 

ANALOG

 

L

R

LINEAR PCM

SUBWFR

SPEAKERS 1

VOLUME

To change the source name to “TV” and “TAPE,” repeat the

same procedure above.

Note:

Without changing the source name, you can still use the connected components. However, there may be some inconvenience.

–“TAPE” or “TV” will appear on the display when you select the CD recorder or DBS tuner.

–You cannot use the digital input (see page 17) for the CD recorder.

19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents RX-7032VSL RX-7032VSL Table of Contents Features PrecautionsIntroduction Remote Control Parts IdentificationButtons 15, 44 Front Panel Display WindowInside the front door Press down on PUSH-OPEN How to open the front doorOutput Rear PanelChecking the Supplied Accessories Before InstallationPutting Batteries in the Remote Control Getting StartedAM Antenna Connections Connecting the FM and AM AntennasFM Antenna Connections Outdoor FM Antenna CableInsert the speaker signal cable Connecting the SpeakersBasic connecting procedure Close the speaker terminalPlacing speakers Connecting the subwoofer speakerFront speakers and center speaker Surround and surround back speakersAnalog Connections Connecting Audio/Video ComponentsCassette deck CD playerIf your video components have an AV Compulink jack Video component connectionsTV and/or DBS tuner To listen to the sound after connection, press VCRDVD player DVD playerTo listen to the sound after connection, press DVD Multi Plug the power cord into an AC outlet Connecting the Power CordDigital Connections Digital output terminalDaily Operational Procedure Selecting the Source to Play Turning On the PowerBasic Operations Speaker and signal indicators on the display Adjusting the VolumeWhen analog input is selected Always lights up Selecting different sources for picture and soundListening with headphones only Selecting the Analog or Digital Input ModeSubwoofer Sound To use the speakers connected to the Front SpeakersTo select the analog input mode again Setting the Dynamic RangePress Analog Direct so that a Direct appears on the display Turning Analog Direct On and OffPress TV SOUND/DBS Press TAPE/CDRReinforcing the Bass Using the Sleep TimerMuting the Sound Changing the Display BrightnessTo store the preset stations Tuning in to Stations Manually Using Preset TuningReceiving Radio Broadcasts Press FM or AM to select the bandWhile listening to an FM station, press FM Mode Selecting the FM Reception ModePress the 10 keys to select a preset channel number To tune in a preset stationSetting the Speakers Configuration Remote Basic SettingsPress Quick Speaker Setup Press in Multi JOG Push SETSpeakers channels number and size Basic Setting ItemsRoom size and speaker distance Items To do SeePress Setting Basic ProcedureSetting the Speakers Push in Multi JOG Push SETSurround back speakers quantity-SBACK OUT Setting the Speaker Distance2SPK Select this to use 2 surround back speakers Measuring unit-DIST UnitSelecting main or sub channel-DUAL Mono Setting the Bass SoundsSelect one of the following Select the playback sounds channelSetting the Component Video Input Setting the Digital Input TerminalsMemorizing the Volume Level for Each Source To recall the volume levelBasic Setting Items Basic Procedure Adjusting SoundPress Adjust Ex. When adjusting the subwoofer level toAdjusting the Speaker Output Levels Adjusting the Equalization PatternsEqualization adjustment-DIGITAL EQ Repeat steps 2 and 3 to adjust the other center frequencyAdjustable parameters Select a speaker you want to adjustFor DAP modes For Pro Logic II Music onlyReproducing Theater Ambience Introducing the Surround Modes Using the Surround ModesDTS Digital Surround What is Dual Mono?DTS Extended Surround DTS-ES DTS 96/24EX/ES Setting Available Surround Mode Incoming Signal TypeSurround Modes Applicable to the Various Software 3D Headphone Mode-3D H PhonePress Surround to activate the Surround mode Activating the Surround ModesSelect and play any source other than DVD Multi 3D Headphone Mode Using the DSP ModesReproducing the Sound Field Introducing the DSP ModesAll Channel Stereo mode To cancel the DSP modesMulti-channel digital signals Activating the DSP ModesActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModeMulti indicator also lights up Press DVD Multi so that DVD Multi appears on the displayRemote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemPress the play 3 button on the CD player Automatic Source SelectionAV Compu Link Remote Control System Connections 1 AV Compu Link ConnectionConnections 2 Video Cable Connection Automatic Power On/Off Automatic Selection of TV’s Input ModeOne-Touch Video Play One-Touch DVD PlayOperating Audio Components Operating JVC’s Audio/Video ComponentsTuner Sound control section Amplifier7/P CD changerCD recorder Cassette deckOperating Video Components DVD playerCH + Operating Other Manufacturers’ Video Equipment If there are more than one code listed for your brand of TVRelease TV Try to operate your TV by pressing TVFor DBS tuner Release CATV/DBSManufacturer Codes For Catv converterRelease VCR If there are more than one code listed for your brandTry to operate your VCR by pressing VCR For VCRFor DVD player Release AudioDenon Panasonic Philips Pioneer 04, 05 Samsung Sony Toshiba YamahaProblem Possible Cause Solution TroubleshootingSpecifications AudioVideo RX-7032VSL AUDIO/VIDEO Control Receiver

LVT1007-010A[A] specifications

The JVC LVT1007-010A[A] is a versatile and high-performing soundbar that has gained attention for its robust features and excellent sound quality. Designed to enhance the home entertainment experience, this soundbar seamlessly integrates with various audio and video devices, making it a suitable choice for both casual viewers and hardcore audiophiles.

One of the standout features of the JVC LVT1007-010A[A] is its impressive audio output. The soundbar boasts a powerful amplification system combined with high-quality drivers that produce clear, rich sound across a wide frequency range. This feature ensures that dialogue in movies is crisp and intelligible while providing deep bass for action sequences and music. The built-in subwoofer further enhances the low-end performance, delivering immersive sound that fills the room.

In terms of connectivity, the LVT1007-010A[A] offers multiple options for seamless integration with other devices. It includes HDMI ARC support, allowing users to connect their TV with a single cable for both audio and control functions. Additionally, the soundbar features optical and AUX inputs, making it compatible with various audio sources, including gaming consoles, Blu-ray players, and streaming devices. Bluetooth connectivity is also a highlight, enabling users to stream music directly from their smartphones or tablets effortlessly.

Another significant characteristic of the JVC LVT1007-010A[A] is its sleek and modern design. The soundbar features a slim profile that can easily fit in front of most TVs without obstructing the screen. Its minimalist aesthetics and high-quality finish make it an attractive addition to any living room setup.

The soundbar also comes equipped with several sound modes and presets, allowing users to customize their listening experience based on content type. Whether watching movies, gaming, or enjoying music, users can switch between modes to optimize sound performance. Furthermore, the remote control provided simplifies operation, enabling users to adjust settings without getting up.

Overall, the JVC LVT1007-010A[A] stands out as a dynamic soundbar that delivers a compelling audio experience. Its combination of powerful sound, diverse connectivity options, and stylish design makes it a worthy investment for those looking to elevate their home entertainment systems. Whether you're a movie buff or a music lover, this soundbar is engineered to meet your audio needs.
Top Page Image Contents