Assembly
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 1
Connect Left and Right Foot Caps (45 and 46) to the Rear Base (12) using:
2 x (47) Screw
2 x (48) Washer
Connect Main Base (1) to Rear Base (2) using:
2 x (34) Bolt4 x (31) Washer
2 x (37) Nylon Lock Nut
Slide Guide Rods (9) down into Rear Base (2) and secure
using: |
|
2 x (36) Bolt | 2 x (31) Washer |