Assembly
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 5
Complete leg hold down assembly using: |
| ||
1 x (10) | Roller Pad Frame | 2 x (30) | Foam |
2 x (43) | Big Plug | 1 x (14) | Pop Pin |
Note: If needed, it is recommended that a rubber mallet be used to secure Big Plug (43).
Complete Seat Pad (20) assembly using: |
| |
2 x (7) Seat Pad Tube | 1 x (35) | Bolt |
5 x (31) Washer | 4 x (33) | Bolt |
Slide L Pin (22) through holes in Foot Plate (11) and Main Base (1).