Diagram 8
7.Position the electronic console over the handrail clamp and plug the connector into the receptacle. See Diagram 8. Do not force the connection. The connec- tor is designed to engage in one direction only. A tab on the connector and a slot on the receptacle help you determine the proper alignment.
8.Slide the electronic console onto the mounting bracket. It should "click" into place as you slide it toward the rear of the treadmill.
9.Attach the C clips around the handrail as shown in Diagram 5 on page 8. Position the slight protrusion on the C clip around the reed switch wire and micro- adjustment knob cable. Squeeze the C clips together to close them and secure the wires in place.
10.With the electronic console successfully assembled, continue to InstalIing the Mounting Pads.
page 11