ASSEMBLY
8
Post
Cover
Post
Cover
•Fit a post cover over the end of a side tube and onto a post.
•Insert five #8 x 3/4” screws into the post cover and tighten.
•Repeat this procedure to attach the other post cover.
9
Net Tube
• Fit the net tube through the sleeve in the center of the net.
10 | Net Tube | Side | |
Tube | |||
| |||
|
|
•Line up the holes in the ends of the net tube with the hole in each side tube.
•Insert a #10 x 1 1/2” screw into each side tube and tighten.
11
Plastic Tab
•Line up the holes in a plastic tab on the net side flap with the holes in the post.
•Insert three #8 x 3/4” screws into the plastic tab and tighten.
•Repeat this procedure to attach the plastic tab on the other net side flap to the post.
5