ASSEMBLY
14 | 1 | 2 |
Backboard
3
4
•Wipe the backboard with a soft cloth.
•Carefully peel a label from the label sheet and apply it to the backboard as shown. Smooth out the label to remove any air bubbles.
•Repeat this procedure to apply the remaining labels to the backboard.
Hint: These labels are designed to overlap!
16
• Pull the rim down, as shown.
17 Upper
Posts
15 |
| • Turn the backboard over. |
| • Fit the upper posts onto the backboard. | |
Rim | Hint: The upper posts only assemble to the backboard one way. | |
| If an upper post does not seem to fit on one side of the backboard, | |
| try the other side! |
18
• Snap the rim into the backboard as shown.
Hint: The rim can only be assembled one way. If it does not seem to fit, turn it around and try again!
• Insert three #8 x 3/4” screws into each upper post and tighten.
7