ASSEMBLY INSTRUCTIONS
STEP 4 | STEP 5 |
a)Assemble the COMFORT PADS [121] on
H A N D L E B A R [ 0 0 9 ] b y s e c u r i n g 2 x COMFORT PAD PLATE with VELCRO [010] to HANDLEBAR [009] with 4 x BOLT [405] + NUT [307].
b)Assemble the COMFORT PADS [121] on 2 x COMFORT PAD PLATE with VELCRO [010].
NOTE: The COMFORT PADS [121] are held in place with velcro, which means they can be easily removed and repositioned if desired.
121
405
010
a)Insert HANDLEBAR POST [007] into MAIN FRAME [001] and secure by tightening KNOB [105].
b)Slide HANDLEBAR [009] onto HANDLEBAR POST [007] and secure by tightening HANDLE [106].
c)Slide COMPUTER [800] onto HANDLEBAR [009].
007 | 800 |
|
009
105
001 
106
| STEP 6 |
|
| a) Assemble PEDALS [202,203]. The right | |
| pedal (marked R) is assembled in a clockwise | |
| direction. The left pedal (marked L) is | |
| assembled in a | |
| Tighten well but avoid excessive force. | |
| Recommended torque is 34 Nm (340 kgf/cm) | |
| NOTE: The LEFT PEDAL [202] is | |
009 | b) Secure WATER BOTTLE HOLDER [115] with | |
| 2 x BOLT 406. |
|
| Counterclockwise | 4mm |
307 | 202 | |
| ALLEN | |
|
| |
|
| KEY |
| 15mm |
|
| WRENCH |
|
13mm
WRENCH
406
203
115
Clockwise
5