PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw- ing is the key number of the part, from the PART LIST on page 11 of this manual. Note: Some parts may have been
| M6 x 60mm Bolt (31) |
M6 Washer (22) |
|
M10 Large Washer (27) | M10 x 63mm Bolt (30) |
| |
M10 x 20mm Bolt (25) |
|
M6 x 16mm Bolt (24) | M10 x 63mm Carriage Bolt (18) |
| |
M10 Washer (20) |
|
M4 x 16mm Screw (28) | M10 x 70mm Bolt (26) |
M10 Nylon Locknut (19) | M10 x 85mm Bolt (23) |
5