JVC CA-MXG51R manual Basic CD Operations, Programming the Playing Order of the Tracks Program Play

CD playback sequence (when ALL DISC is selected)

When 3 CDs are loaded on the disc trays, they are played in one of the following sequences.

•When CD1 is pressed : CD1 ] CD2 ]CD3 (then stops)

•When CD2 is pressed : CD2 ] CD3 ]CD1 (then stops)

•When CD3 is pressed : CD3 ] CD1 ]CD2 (then stops)

*When only 2 CDs are loaded, they are played in the same order, but the disc tray without a CD is skipped.

Basic CD Operations

While playing a CD, you can do the following operations.

To exchange CDs during playback of another

Press DISC CHANGE to change the CD and the DISC CHANGE carrousel comes out. If you change CDs during play, the current play

will not stop until all CDs you have changed are played.

To close the carrousel, press DISC CHANGE or 0.

To skip to the another CD in the carrousel

Programming the Playing Order of the Tracks

— Program Play

You can arrange the order in which the tracks play before you start playing. You can program up to 32 tracks.

•To use Repeat play (see page 16) for Program play, press REPEAT after starting Program play.

On the unit ONLY:

1 Load CDs.

•If the current playing source is not the CD player, press CD 6, then 7before going to the next step.

2 Press PROGRAM so that
	AT	PROGRAM	RANDOM
“PROGRAM” appears on the
display.

The PRGM (program) indicator also lights up on the display.

Press DISC SKIP on the remote control.

To stop play for a moment

Press CD 6.

While pausing, “PAUSE” appears on the display.

To resume play, press CD 6 again.

DISC SKIP

•If a program has been stored in memory, the program is called up.

3 Press one of the disc number buttons (CD1, CD2 or CD3) to select the disc number you

To locate a particular point in a track

During play, press and hold 1or Á.
• 1: Fast reverses the disc.	TUNING
• Á: Fast forwards the disc.
When using the remote control, press and

hold 4or ¢.

To go to another track

Press 4 or ¢ repeatedly before or

PRESET

during playback.

• 4: Goes back to the beginning of the current or previous tracks.

•¢: Skips to the beginning of the next or succeeding tracks.

If you press and hold 4or ¢on the unit before or during play

You can change the tracks continuously.

To go to another track directly using the number buttons

want to play.

Track number

Disc number Program step number

4 Press 4or ¢to select the track number, then press SET.

Each time you select a track and press SET, the selected track number is added to the CD track number indicator.

PRESET

SET

Pressing the number button(s) before or during play allows you to start playing the track number you want.

Ex.: For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10. For track number 32, press +10, +10,

+10, then 2.

1 2 3

4 5 6

7 8 9

10+10

– 15 –