3.Attach the Base Plate (37) to the Left Base (2) with a 3/8” x 5 1/2” Bolt (58) and a 3/8” Nylon Locknut (70).
Attach the Left Upright (7) to the Left Base (2) with the two indicated 5/16” x 2 1/2” Carriage Bolts (57) and two 5/16” Nylon Locknuts (71).
Attach the Left Leg (36) to the Left Base (2) with the two indicated 5/16” x 2 1/2” Carriage Bolts
(57)and two 5/16” Nylon Locknuts (71). Be sure the large upper hole in the Left Leg is on the side shown.
Do not tighten the 5/16” Nylon Locknuts (71) yet.
4.Press a 2” x 2 1/2” Inner Cap (22) into the top of the Right Leg (73).
Attach the Right Upright (6) to the Right Base (1) with the two indicated 5/16” x 2 1/2” Carriage Bolts (57) and two 5/16” Nylon Locknuts (71).
Attach the Right Leg (73) to the Right Base (1) with the two indicated 5/16” x 2 1/2” Carriage Bolts (57) and two 5/16” Nylon Locknuts (71).
Do not tighten the 5/16” Nylon Locknuts (71) yet.
3 |
|
|
| 7 |
|
2 | 71 | 36 |
71 |
| |
| Large | |
|
| |
| 71 | Hole |
|
| 71 |
| 57 |
|
|
| 70 |
| 57 | 37 |
|
| |
| 58 |
|
4 |
|
|
| 6 |
|
| 22 |
|
|
| 71 |
| 71 |
|
| 73 |
|
| 71 |
|
| 71 | 57 |
|
| |
| 1 |
|
| 57 |
|
6