JVC CA-MXG50 manual Maintenance, Troubleshooting, Handling discs, Handling cassette tapes

Page 28

English

Maintenance

To get the best performance of the unit, keep your discs, tapes, and mechanism clean.

Handling discs

• Remove the disc from its case by holding it at the edge while pressing the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the disc.

•Put the disc back in its case after use to prevent warping.

• Be careful not to scratch the surface of the disc when placing it back in its case.

• Avoid exposure to direct sunlight, temperature extremes, and moisture.

To clean the disc

Wipe the disc with a soft cloth in a straight line from center to edge.

DO NOT use any solvent — such as conventional record cleaner, spray, thinner, or benzine — to clean the disc.

Handling cassette tapes

• If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating.

• If the tape is loose, it may get stretched, cut, or caught in the cassette.

•Be careful not to touch the tape surface.

•Avoid the following places to store the

tape:

— In dusty places

— In direct sunlight or heat

— In moist areas

— Near a magnet

Troubleshooting

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

Unable to cancel the display demonstration.

No sound is heard.

Hard to listen to broadcasts because of noise.

The disc sound is discontinuous.

The carrousel does not open or close.

The disc does not play.

The cassette holders cannot be opened.

Impossible to record.

Stereo effect is lost.

Operations are disabled.

Unable to operate the unit from the remote control.

Cause

Other buttons are pressed to cancel the display demonstration.

Connections are incorrect or loose.

•Antennas are disconnected.

•The AM loop antenna is too close to the unit.

•The FM antenna is not properly extended and positioned.

The disc is scratched or dirty.

•The AC power cord is not plugged in.

•The carrousel is locked.

The disc is placed upside down.

Power supply from the AC power cord has been cut off while the tape was running.

Small tabs on the back of the cassette are removed.

Vocal Masking is activated.

The built-in microprocessor may malfunction due to external electrical interference.

•The path between the remote control and the remote sensor on the unit is blocked.

•The batteries are exhausted.

Action

Press DEMO on the unit. (See page 8.)

Check all connections and make corrections. (See pages 6 to 8.)

•Reconnect the antennas correctly and securely.

•Change the position and direction of the AM loop antenna.

•Extend the FM antenna at the best position.

Clean or replace the disc. (See above.)

•Plug the AC power cord.

•Unlock the carrousel. (See page 15.)

Place the disc with the label side up.

Turn on the unit.

Cover the holes with adhesive tape.

Cancel the Vocal Masking. (See page 19.)

Unplug the AC power cord and then plug it back in.

•Remove the obstruction.

•Replace the batteries.

– 23 –

Page 27 Page 29
Image 28
Page 27 Page 29
Contents CA-MXG50 Precaución -- Interruptor English Español Português CA-MXG50 Class Laser Product Introduction PrecautionsAbout This Manual Contents Front Panel Location of the Buttons and ControlsBecome familiar with the buttons and controls on your unit Front Panel Display windowSee pages in the parentheses for details Disc number buttons and lamps CD1, CD2, and CD3 13, 14Remote Control Remote ControlConnecting Antennas Getting StartedUnpacking FM antennaConnecting Speakers AM antennaTo connect an outdoor AM antenna For better reception of both FM and AMConnecting Other Equipment Adjusting the Voltage SelectorCancelling the Display Demonstration On the unit onlyTurning On or Off the Power Setting the ClockPress CLOCK/TIMER Common OperationsSelecting the Sources Adjusting the Volume Setting the AM Tuner Interval SpacingTo turn down the volume level temporarily To listen to the FM/AM broadcasts, press FM/AM. SeeReinforcing the Bass Sound Selecting the Sound ModesSurround modes SEA Sound Effect Amplifier modesTuning in a Station Tuning in a Preset StationPresetting Stations Listening to FM and AM BroadcastsPlaying Back CDs Loading CDsPlaying Back the Entire Discs Continuous Play If you wish to load a third discBasic CD Operations Programming the Playing Order of the Tracks Program PlayPress Program so that Repeating Tracks or CDs Repeat Play Playing at Random Random PlayProhibiting Disc Ejection Tray Lock Playing Back Tapes Playing Back a TapeRecording a Tape on Deck B RecordingPress REC START/STOP Dubbing Tapes CD Synchronized RecordingPress Dubbing Press CD REC StartUsing the Microphones Singing Along KaraokeMicrophone Mixing Press Karaoke on the remote Karaoke control repeatedlyUsing the Timers Using Daily TimerUsing Recording Timer Press CLOCK/TIMER repeatedlyTimer Priority Using Sleep TimerPress Sleep Maintenance TroubleshootingTo clean the disc Handling discsSpecifications Important for mains AC line Page Page

CA-MXG50 specifications

The JVC CA-MXG50 is a sophisticated home audio system designed for those who appreciate quality sound and versatile features. This compact yet powerful unit incorporates a variety of technologies aimed at delivering an exceptional audio experience.

One of the standout features of the CA-MXG50 is its high-power output capabilities. The system boasts a robust amplifier that produces an impressive audio performance, making it suitable for everything from casual listening to lively parties. With a total power output of 200 watts, the speakers are designed to fill a room with rich and dynamic sound.

The CA-MXG50 supports multiple audio sources, ensuring that users can enjoy their favorite music in various formats. It includes a CD player, cassette deck, AM/FM radio tuner, and USB port for connecting external devices. This versatility allows users to play their extensive music collections, whether they're on CD, cassette, or digital files. The inclusion of a USB port supports MP3 files, making it easy to enjoy digital music directly from a flash drive.

Another key characteristic of the JVC CA-MXG50 is its enhanced bass response. The unit features a powerful subwoofer that delivers deep and punchy bass, making it ideal for genres like hip-hop and electronic music. The system also incorporates JVC's proprietary technologies that optimize sound quality, ensuring a clear and balanced audio experience with minimal distortion.

In terms of design, the CA-MXG50 is sleek and modern, featuring a compact size that makes it easy to fit into most home spaces. The user interface is intuitive, with clearly labeled buttons and a bright LED display that makes navigation straightforward. The remote control provides added convenience, allowing users to adjust settings from a distance.

Connectivity options are abundant, with the CA-MXG50 including aux inputs for additional devices. This means users can easily connect smartphones, tablets, or other audio sources. Furthermore, the system is equipped with headphone output for private listening, a great feature for late-night sessions.

Overall, the JVC CA-MXG50 is a versatile and powerful audio system that caters to various listening preferences. Its blend of high-quality sound, modern design, and easy connectivity options make it an attractive choice for music lovers looking to enhance their home audio experience. Whether for personal enjoyment or entertaining guests, the CA-MXG50 stands out as a reliable and enjoyable audio solution.
Top Page Image Contents