JVC CA-MXG50 Common Operations, Turning On or Off the Power, Setting the Clock, Press CLOCK/TIMER

English

Common Operations

Turning On or Off the Power	3 Press 4or ¢to adjust the	PRESET
	minute, then press SET.

To turn on the unit, press

STANDBY/ON so that the STANDBY STANDBY lamp goes off.

STANDBY/ON

SET

To turn off the unit (on standby), press	STANDBY
STANDBY/ON again so that the	STANDBY/ON
STANDBY lamp lights up.

A little power is always consumed even while the unit is on standby.

To switch off the power supply completely, unplug the AC

power cord from the AC outlet.

To check the clock time

Press DISPLAY while playing any source.	DISPLAY
• Each time you press the button, the source
indication and the clock time alternate on the
display.

To adjust the clock again

If you have adjusted the clock before, you need to press CLOCK/TIMER repeatedly until “CLOCK” is selected.

•Each time you press the button, the clock/timer setting modes change as follows:

When you unplug the AC power cord or if a power failure occurs

The clock is reset to “– – : – –” soon, while the tuner preset stations (see page 12) will be erased in a few days.

Setting the Clock

Before operating the unit any further, first set the clock built in this unit. You can set the clock whether the unit is on or off.

DAILY ON TIME REC

Canceled CLOCK ON TIME

If there is a power failure

The clock loses the setting and is reset to “– – : – –.” You need to set the clock again.

On the unit ONLY:

1	Press CLOCK/TIMER.	CLOCK
		/ TIMER

The hour digits start flashing on the display.

2 Press 4or ¢to adjust the hour, then press SET.

PRESET

SET

•If you want to correct the hour after pressing SET, press CANCEL. The hour digits start flashing again.

– 9 –