PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw- ing is the key number of the part, from the PART LIST on page 14 of this manual. Note: Some small parts may have been
M8 x 16mm Bolt (17) |
|
| 3/8" Nylon Locknut (19) |
| 3/8" Washer (18) |
3/8" x 2" Bolt (21) | 3/8" x 3/4" Bolt (22) |
| |
M8 x 60mm Bolt (16) | 3/8" x 2.85" Bolt (23) |
5