Weider WEBE0635.0 user manual Part Identification Chart

Page 12

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw- ing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.

M8 x 15mm Screw (34)

M10 Washer (11)

M6 x 16mm Screw (36)

M6 x 38mm Screw (39)

M8 Washer (31)

M8 x 45mm Bolt (33)

M6 Washer (32)

M8 x 53mm Bolt (38)

M8 Nylon Locknut (30)

M10 x 55mm Bolt (35)

M10 Nylon Locknut (15)		M8 x 55mm Bolt (37)

M10 x 160mm Bolt (27)

Image 12

Contents QUESTIONS? Model No. WEBE0635.0 Serial NoCall TOLL-FREE Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Before YOU Begin Right SideLeft Side Assembly Make Things Easier for YourselfLocknuts yet Tighten the M8 Nylon Locknuts 30 used in steps 1Locknut the Leg Lever must be able to pivot easily Screws yetRepeat this step with the other Pad Tube Adjustments Attaching Weights to the BarbellUsing the LEG Lever Adjusting the BackrestExercise Guidelines Muscle Chart Cooling DownStaying Motivated Part Identification Chart Part LIST-Model No. WEBE0635.0 Qty DescriptionR0805A Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT