6.Grease the M10 x 55mm Bolt (35). Attach the Leg Lever (7) to the Front Leg (1) with the Bolt and an M10 Nylon Locknut (15). Do not overtighten the
Locknut; the Leg Lever must be able to pivot easily.
7.Attach the Large Backrest (12) to the Backrest Frames (6) with four M6 x 38mm Screws (39) and four M6 Washers (32). Do not tighten the
Screws yet.
Attach a Small Backrest (13) to the Backrest Frames (6) with two M6 x 38mm Screws (39) and two M6 Washers (32). Do not tighten the
Screws yet.
8.Grease the M10 x 160mm Bolt (27). Attach the Backrest Frames (6) to the Bench Frame (2) with the Bolt, two M10 Washers (11), and an M10 Nylon Locknut (15). Do not overtighten the
Locknut; the Backrest Frames must be able to pivot easily.
Tighten the M6 x 38mm Screws (39) used in step 7.
9.Attach the other Seat (41) to the Bench Frame (2) with two M6 x 16mm Screws (36).
6 |
|
|
|
| 15 |
|
|
7 |
|
| Grease |
|
|
| |
|
| 35 |
|
|
| 1 |
|
7 |
|
|
|
| 13 |
|
|
12 |
|
|
|
|
| 32 | 39 |
|
|
| |
| 32 | 39 |
|
|
|
| |
6 | 39 |
|
|
32 |
|
| |
|
|
| |
8 |
|
|
|
11 |
|
|
|
15 |
|
|
|
6 |
|
| Grease |
| 11 |
| |
|
|
| |
| 2 | 27 |
|
9 |
|
|
|
41 |
|
|
|
|
| 2 |
|
| 36 |
|
|
7