![](/images/new-backgrounds/1222763/2227639x1.webp)
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw- ing is the key number of the part, from the PART LIST on page 14 of this manual. Note: Some small parts may have been
M10 Nylon Locknut (19) | M10 x 40mm Bolt (21) |
| |
| M10 Washer (18) |
M10 x 19mm Bolt (22) |
|
M10 x 62mm Bolt (16) | M10 x 68mm Bolt (23) |
5