Weider WEMC0942.1 user manual Decal

4.Attach the Cover Plate (3) to the Tray (B) with the two Button Head Screws (C) that were removed in step 3. Note: Make sure the decal is over the indicated resistance bars

5.Attach a “U”-channel Extension (4) to a “U”-chan- nel (D) with two 1/4" x 12mm Flat Head Screws

(7).

Attach the other “U”-channel Extension (4) to the other “U”-channel (D) in the same manner.

4

C

3

Decal

B

Resistance

Bars

5

4

D

7

6.Make sure that all parts have been properly tightened. To use the MAX PACK to add resistance, refer to ADJUSTING THE RESISTANCE in the resistance system user’s manual.

5