Weider WESY09321 user manual

Page 10

17.Insert the rod on the Backrest Frame (15) into the slot in the Seat Carriage (12). Hold the Backrest vertically over the Seat Carriage and slide the rod into the slot, as shown in the inset draw- ing.

18.Locate the Long Cable (80). Slide one end of the Cable through the Pulley Arm (22) as shown in the inset drawing.

Wrap the Long Cable (80) around a 90mm Pulley (28). Attach the Pulley to the Pulley Arm (22) with an M10 x 40mm Bolt (71) and an M10 Nylon Locknut (76).

19.Wrap the Long Cable (80) around a 90mm Pulley

(28).Attach the Pulley and a Cable Trap (29) to the Upright Base (3) with an M10 x 132mm Bolt

(72)and an M10 Nylon Locknut (76).

17
		Rod
		15
		12
Rod
15
Slot
12
18
		80
		22
71
22
	28
		80
76
19
76	28	29
	80	72
	80
10

Image 10

Contents Model No. WESY09321 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Dimensions Before YOU BeginAssembly Make Things Easier for YourselfPage Page Page Locknut the Small Wheels 47 must be able to roll easily Page Page Locate the two Short Cables 33. Wrap a Short Locate the Bench Cable 32. It has three endsRepeat this step with the other Short Cable Page Adjusting the Seat AdjustmentsAdding Weights to the Weight Carriage Attaching the High Pulleys and LEG LeverAdjusting the Backrest Attaching the AccessoriesStoring the Weight System Weight Resistance Chart Weight High Pulley LOW Pulley LEG LeverCable Diagram Long CableExercise Guidelines Cooling Down Muscle ChartStaying Motivated Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Part Identification Chart M10 Nylon Locknut M10 Washer M8 Nylon Locknut Part LIST-Model No. WESY09321 Qty DescriptionR0602A