JVC CA-D351TR Using the Timer, Setting the Clock, Press the Shift button Press the 1 Clock button

Using the Timer

2TIMER

1 CLOCK

	1	2	3		Display
4 – SELECT 5 +	4	5	6	SLEEP
	CLOCK	TIMER	PTY/EON
	– SELECT + DISPLAY MODE
8 SET	7	8	9	SHIFT	SHIFT
		SET
	10	10	FM MODE	FM/AM	Clock, timer-on time etc.
	DISC		PLAY MODE	AUX
	DISC		7/CLEAR	£/8
	DISC		C D
	A					kHz
		B				MHz
	REC PAUSE		DECK
			VOLUME			A.BASS EX S.MODE
					CONT. RANDOM
	SOUND	ACTIVE				TA NEWS INFO EON
	MODE	BASS EX.			ALL PRGM CLOCK	REC SLEEP MONO ST
			RM-SED40TRU
			REMOTE CONTROL

Timer indicator

English

When the System is being used, the display shows other items as well.

However, we have only shown the items described in this section.

The timers lets you control listening and recording functions automatically.

Use the Remote Control to set the clock and timers.

SHIFT

1

CLOCK

45

–SELECT +

8

SET

Setting the Clock

The timers depend on the clock: the clock must be right for the timers to work as you expect. You can set the clock whether the Unit is on or off.

Note that the clock must be set, otherwise the timers cannot be set.

1.Press the SHIFT button.

2.Press the 1 CLOCK button.

The “CLOCK” indicator on the display lights up and the clock time blinks.

3.Press the SELECT 5 + or 4 – button to set the time.

Pressing the 5 + button increases the time and pressing 4 – decreases the time. Pressing the button continuously advances or decreases the time in 10 minute intervals.

4.Press the 8 SET button.

The blinking time display changes from a blinking display to a steady display and the clock timer starts from 0 seconds.

CAUTION: If there is a power failure, the clock loses its setting. The display shows “0:00”, and the clock must be reset.

27