Samsung DVD-CM250H/XEF, DVD-CM250H/XEU Using the Timer Programming Feature, Recording start time

VCR

Using the Timer Programming Feature

	PR	Day	Start	Stop	Speed
		WE 01	19 : 00	19 : 30	SP
GB			:	:
			:	:
			:	:
			:	:
			:	:

15

The Timer Programming feature allows you to preset the DVD- VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset.

☛Before presetting a recording, check that the date and time are correct.

1Insert the cassette and press TIMER on the remote control.

Result: The TIMER PROGRAMMING is displayed.

2Press ❿ to select the input source.

3Select the required station or input source (AV1, AV2 or AUX )

by pressing the , ❷ buttons.

4Press ❿ to select the recording day.

5 Select the required day by pressing the or ❷ buttons.

6Press ❿ to select the recording start time.

7 Select the required hour value by pressing the or ❷ buttons.

8Press ❿ to select the minutes.

9	Select the required minute value by pressing the	or ❷
	buttons.

10Press ❿ to select the recording stop time.

11	Select the required recording stop time by pressing the or ❷
	buttons, following the same procedure as when selecting the
	recording start time.
12	Press ❿ to select the recording speed.
13	Press the or ❷ buttons to select the SP (Standard Play), LP
	(Long Play), Auto (Auto Tape Speed Select) recording speeds.

14When you have finished, press the RETURN button.

15Press the STANDBY/ON button to activate the timer.

Result: Before starting recording, the DVD-VCR compares the timer duration with the remaining time on the cassette.

➢Auto Tape Speed Select. The DVD-VCR’s “Auto Tape Speed Select” function compares the duration of the timer recording to the actual recording time remaining on the tape loaded. If there is insufficient tape to complete a timer recording in AUTO mode, the DVD- VCR automatically switches to LP mode to record the whole programme.

32