Samsung DVD-CM250H/XEF, DVD-CM250H/XEU manual Audio Dubbing a Pre-recorded Cassette, Cd, Dvd

VCR

Audio Dubbing a Pre-recorded Cassette

GB

DVD & VCR	AUX
	AUDIO
IN	OUT
RADIO ANT.	R
FM
75	L
COAXIAL
AM
	VIDEO

7

A.DUB -0:05:23

With the Audio Dubbing function, you erase the previously recorded sound and replace it with a new soundtrack from:

◆A CD, DVD

◆A microphone connected to a sound system

◆A cassette player

Restriction:

Audio dubbing is applicable only to the longitudinal audio track (normal audio).

1Connect an RCA audio cable to the appropriate output on your sound system (cassette player for example).

2Connect the other end of the RCA audio cable to the audio input connectors (L, R) on the rear of your DVD-VCR.

3Insert the pre-recorded cassette on which the audio track is to be replaced, and press the ❿ll to start playback.

4Search for the Audio Dubbing (ending) point using the ❿❿, and set the counter to 0:00:00 by pressing INFO. and CLEAR.

5Search back slightly beyond the Audio Dubbing start point using the ➛➛ button.

6Press the ❿ll button.

Press the ❿ll button one more time to make Still mode.

7Press A.DUB.

Result: Your DVD-VCR is now in the Audio dubbing Still mode.

8On the sound system, locate the point on the cassette at which you wish to start playback.

Example: The track that you wish to record on the cassette.

9When you are ready:

◆Start playback on the sound system

◆Press the REC ( ● ) on the remote control.

Result: The soundtrack is replaced on the pre-recorded cassette.

10The audio dubbing will finish when the counter reaches 0:00:00.

➢The new sound will be recorded on the normal sound track of the tape, and the original sound will remain on the Hi-Fi sound track.

To hear the new sound and original sound mixed together, press the Audio button on the remote control until the MIX option is displayed (see page 35).

42