Samsung DVD-CM250H/XEU, DVD-CM250H/XEF manual Searching for a Specific Sequence, Next, Seq. etc

Searching for a Specific Sequence

VCR

Each time you record a cassette on this DVD-VCR, an “index” is automatically marked on the tape when recording starts.

The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. Depending on the direction selected, the indexes are numbered as follows:

		➞
	Prev	Seq. being	Next
etc.	Seq.	played	Seq. etc.
2	1	1	2

➢This DVD-VCR uses a standard indexing system (VISS). As a result, it will recognize any indexes marked by other VCRs using the same system and vice versa.

Go to [0:00:00] Stop

Use this feature when you want to search for the [0:00:00] counter position on a cassette. Press the CLEAR button at the point on the tape where you want to set the counter to [0:00:00].

The VCR will rewind or fast forward, searching for the [0:00:00] counter position, and then automatically stop at that position.

1	After pressing the SEARCH, press the corresponding or ❷
	buttons, until the Go To [0:00:00] option is selected.

2Press the OK or ❿.

End Search

Use this feature when you want to search for a blank position to record a program on a cassette.

The VCR will fast forward, searching for a blank position, and then automatically stop at that position.If the VCR reaches the end of the tape during end search, the tape will be ejected.

1	After pressing the SEARCH, press the corresponding or ❷
	buttons, until the End Search option is selected.

2Press the OK or ❿.

GB

37