Samsung DVD-CM250H/XEF manual Presetting the Stations Manually, 13 To...Then, If you Then

VCR

Presetting the Stations Manually

Language : English

GB	Install
	User Set
	Auto Power Off	: Off
	Screen Messages	: On

Install

Auto Setup
Manual Setup
TV System	: K
VCR Output CH	: CH 36

TV STATION TABLE

PR CH NAME DEC

1

2

3

4

5

SWAPPING : OK

DELETE : CLEARRETURN

MANUAL TUNING

PR	:	1
CH	:	- - -
MFT	:	-
DECODER	: OFF
NAME	: - - - -

MEMORY : OK

RETURN

☛You do not need to preset the stations manually if you have already set them automatically.

1After pressing the MENU, press the OK or ❿ . Result: The Setup menu is displayed.

2	Press the corresponding , ❷ buttons to select the Install
	option.

3Press the OK or ❿ to select this option. Result: The Install menu is displayed.

4	Press the corresponding		or ❷ buttons, until the Manual
	Setup option is selected.
5	Press the OK or ❿ to select a		Manual Setup option.
	Result:	The TV STATION TABLE menu is displayed.
6	Press the	or ❷ buttons to select a programme number as
	required.

7Press the ❿ button to preset the station.

Result: The MANUAL TUNING menu is displayed.

8Press the ➛ or ❿ buttons to start scanning channel.

Result: The frequency band is scanned and the first station found is displayed.

9Press the ❷ button, until the DECODER is selected.

10Press the ❿ button to activate or deactivate use of the decoder for the TV station, if necessary.

11 Press the or ❷ buttons until the NAME is selected.

The station name is set automatically from the broadcast signal.

12To change the programme’s name, press the ❿ button.

Result: The first letter of the name flashes.

13To...Then...

	Select a character	Press the or ❷ button until the
	in the name	required character is displayed
		(letters, numbers or “-” character).
	Move to the next or	Press the ➛ or ❿ buttons
	previous character	respectively.
14 If you...		Then...
	Wish to store the	◆ Press the	or ❷ buttons until the MFT
	station displayed	is selected.
		◆ Press the ➛ or ❿ buttons to adjust the
		picture, if necessary.
		◆ Press OK to store the station
	Do not wish to	◆ Press the	or ❷ buttons until the CH
	store the station	is selected.
	displayed	◆ Press the ➛ or ❿ buttons to go on

scanning the frequency band and display the next station

◆ Go back to the beginning of Step 9

15Repeat this procedure from Step 9 onwards, until all the required stations have been stored.

16On completion, press the RETURN button three times to exit the menu.

20