Samsung DVD-CM250H/XEU, DVD-CM250H/XEF manual Presetting the Stations Automatically

Presetting the Stations Automatically

VCR

☛You do not need to preset the stations if you have already set them automatically (see Plug & Auto Set Up on page 13).

Your DVD-VCR contains a built-in tuner used to receive television broadcasts.

You must preset the stations received through the tuner. This can be done:

◆Plug & Auto Set up (see page 13)

◆Automatically

◆Manually (see page 20)

You can store up to 80 stations.

1After pressing the MENU, press the OK or ❿ . Result: The Setup menu is displayed.

2	Press the corresponding ,❷ buttons to select the Install
	option.

3Press the OK or ❿ to select this option. Result: The Install menu is displayed.

4	Press the corresponding or ❷ buttons, until the Auto
	Setup is selected.
	And then press the OK or ❿ to select this option.
	Result:	A message appears, indicating that any channels
		already preset on your VCR will be deleted.
5	Press OK to start the auto scanning.
	Result:	◆	The Please Wait indication highlight on the
			television screen.
		◆ The first frequency band is scanned and the first
			station found is displayed and stored.
		◆ The DVD-VCR then searches for the second station
			and so on.
		◆	When the automatic scanning procedure has
			finished, the DVD-VCR switches automatically to

programme 1.

➢ The number of stations automatically stored by the DVD- VCR depends on the number of stations that it has found.

6If you wish to cancel the auto scanning before the end, press the MENU button to exit the menu.

➢Once the auto scanning procedure has finished, some stations may have been stored more than once; select the stations with the best reception and delete the ones no longer required (see page 21).

Language : English

Install	GB
User Set
Auto Power Off	: Off
Screen Messages	: On

Install

Auto Setup
Manual Setup
TV System	: K
VCR Output CH	: CH 36

Auto Setup

Your data will be lost

Press OK to continue

Menu to exit

Auto Setup

Please Wait

15%

19