Setting Up the Display Options

DVD

1With the unit in Stop mode, press the MENU button.

2

Select DVD using ,buttons, then OK or button.

 

 

3

Select Display Setup using ,buttons, then press the OK or

 

button.

 

 

4

Use the ,buttons to select the desired item. Then press the

OK or button.

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio).

1. 4:3 Letter-Box :

Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

2. 4:3 Pan-Scan :

Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

3. 16:9 Wide :

You can view the full 16:9 picture on your widescreen TV. Black Level

Adjusts the brightness of the screen.(On/Off) NTSC Disc Output

“NTSC” if the screen only has one NTSC-video entrance. If this is not the case, you can choose to leave “ PAL 60Hz” as is.

DVD Out

1. RGB: Sends RGB signal from the AV JACK(SCART terminal).

2. S-Video:Sends S-VIDEO signal from the S-VIDEO JACK.

3. Video: - Sends COMPOSITE VIDEO signal from the AV JACK(SCART terminal).

- Sends COMPONENT INTERLACE signal from

COMPONENT JACK.

Setup

 

 

Setup

 

 

Setup

:

GB

Display Setup

 

 

 

 

 

 

 

Display Setup

 

 

 

 

 

 

TV Aspect

: 4:3 L-Box

Black Level

 

 

 

 

NTSC Disc Output

: PAL 60Hz

DVD Out

: RGB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S-Video Connections (for DVD)

DVD

The S-Video is only for the DVD player. The tuner and VCR will still be viewed through the RF or line inputs.

You must follow the “DVD Out” instructions above to activate your alternative (S-Video) video selection.

If your television is equipped with S-Video input, you can enjoy superior video quality when watching DVDs with your DVD-VCR.

1Connect S-Video Out to TV

Connect an S-Video cable from the S-Video Out on the back panel of the DVD-VCR to the S-Video Input on your television.

DVD Only

 

SPEAKERS

 

 

 

 

COMPONENT VIDEO OUT

FRONT R

FRONT L

WOOFER

 

 

 

 

1

 

 

 

SURROUND R

SURROUND L

CENTER

S-VIDEO OUT

 

 

 

To S-Video Input on Your TV

49

Page 49
Image 49
Samsung DVD-CM250H/XEU manual Setting Up the Display Options, Video Connections for DVD, Connect S-Video Out to TV