Samsung DVD-CM250H/XEF AV1EURO AV By means of 21-pin Scart Cable, By means of RF Coaxial Cable

GB

Connecting DVD-VCR to a Satellite Receiver or Other Equipment

You can connect your DVD-VCR to a Satellite receiver or other DVD-VCR using the SCART cable if the appropriate outputs are available on the equipment chosen. The following illustrations give a few examples of the connection possibilities.

1. AV1(EURO AV): By means of 21-pin Scart Cable

Plug the SCART Cable with satellite receiver or other equipment into the AV1 (EURO AV) socket on the rear of the DVD-VCR.

After making this connection, select the source by pressing the INPUT SEL. button for the AV1 input sources.

2. By means of RF Coaxial Cable

After making this connection, you must preset the station received through the satellite tuner.

RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the DVD-VCR, e.g. re-adjust to channel 39.

Satellite Receiver or other Equipment	Aerial
	Aerial Connector

TV

RF coaxial cable

	2
1	DVD & VCR	AUX
		AUDIO
	IN	OUT
	RADIO ANT.	R
SCART Cable	FM
	75	L
	COAXIAL
	AM
		VIDEO

1. AV2 IN: By means of 21-pin Scart Cable

Plug the SCART Cable with satellite receiver or other equipment into the AV2 (DEC./EXT.) socket on the rear of the DVD-VCR.

After making this connection, select the source by pressing the INPUT SEL. button for the AV2 input sources.

2. By means of RF Coaxial Cable

After making this connection, you must preset the station received through the satellite tuner.

RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the DVD-VCR, e.g. re-adjust to channel 39.

Satellite Receiver or other Equipment Aerial

Aerial Connector

2

TV

	1
DVD & VCR	AUX
	AUDIO
IN	OUT
RADIO ANT.	R

FM

75 L

COAXIAL

AM

VIDEO

SCART Cable

RF coaxial cable

12