1-11
Localizing the Problem
If Power-Up Happened Correctly
Highlight the RF Output field(1).
Select AUX RF OUT from the list of choices.
Set the RF GeneratorAmplitude field to 10 dBm(2).
Set the AF GeneratorAmplitude field to1 V (3).
Figure 1-5 RF Analyzer Settings
Where to Go Next
• If the generators are within specifications, go to the next section, “Checking the RF
Analyzer Using the RF Generator”.
• If one or both of the generators appear to be faulty, go to Chapter 2, “Running
Diagnostics” and run the appropriate tests.
3
12