Agilent Technologies 8922 Running Memory Card or ROM Based Diagnostics, Selecting Memory Card Diagnostic Test Execution Conditions

2-6
Running Diagnostics
Running Memory Card or ROM Based Diagnostics
Selecting Memory Card Diagnostic Test Execution Conditions
Where to Go Next:
If any high-probability failures occurred, those assemblies can be replaced and the test re-
run. When the tests pass, the performance tests can be run to verify performance (refer to
Chapter 3). If low-probability failures occur, the performance tests can be run for further
indication or measurements can be made to individual assemblies using Chapters 4, 12
and 13.
Specifies whether to run measurements continuously or
stopafter completion of each measurement. This choice
can be modified when a diagnostic program is running.
BEFORE RUNNING A TEST
Specifies whether to stop
testing or continue when a
failure occurs. This choice
can be modified when a
diagnostic program is
running.
This feature is not used by
the diagnostic program.
Specifies whether to print diagnostic test results.
WHILE RUNNING A TEST
These options are used for controlling various
partsof the tests. These options can be changed
depending on the test program. They are
selected by using the cursor and knob.