8-18
Assembly and Disassembly Procedures

A23 Input Section Removal

A23 Input Section Removal
Done with instrument top and bottom cover removed.
1. Do steps 1 through 11 of the A1 Front Panel removal instructions.
NOTE The front panel assembly must be separated from the main chassis. Considerable pulling
force is required to pull the front panel from the chassis.
2. Remove two 5/8-inch hex nuts.
3. Remove two TX-15 side mounting screws.
4. Remove one TX-15 bottom mounting screw.
5. Disconnect all cabling and remove input section assembly.
Tools Required
• TX-15 screw driver
• TX-10 screw driver
• 2-pt. Pozidriv
• 5/8-inch wrench
• 1/4-inch wrench
4
1/4" SMC
CONNECTOR
2(2 places)
3
FRONT PANEL
AND SIDE VIEW
A22 Display
RIBBON
CABLE
1/4" SMC CONNECTOR
BOTTOM VIEW