1-12
Localizing the Problem
If Power-Up Happened Correctly
Checking the RF Analyzer Using the RF Generator
This section tests the RF Analyzer using the RF Generator as a signal source. This task
assumes the same setting used in the previous section.
• Connect the RF In/Out to the Aux RF Out.
Figure 1-6 Front Panel Connections for the RF Analyzer
Press .
NOTE On the HP/Agilent 8922A/B, press .
Onthe HP/Agilent 8922E/F/G/H/M/S, press , (RFGEN RF ANL).
RF GEN RF ANL
RF GEN RF ANL
SHIFT CELL CNTL