8-3
Assembly and Disassembly Procedures

Top and Bottom Cover Removal

Top and Bottom Cover Removal
1. Remove four 2-pt. Pozidriv top bumper mounting screws.
2. Remove four 2-pt. Pozidriv side mounting screws and bumpers.
3. Remove four 2-pt. Pozidriv screws and standoffs.
4. Remove fourteen TX-10 screws and top cover.
5. Remove two TX-10 screws and bottom foot.
6. Remove two TX-15 screws and bottom cover.
Tools Required
TX-15 screw driver
TX-10 screw driver
2-pt. Pozidriv screw driver
24
6
(Both Sides)
(Both Sides)
(Both Sides)
To remove covers, pull sides
slightly apart, slide them back a
few inches and lift off.
13

SIDE VIEW